How Do You Tie Shoes Without Laces So They Slip On?

The hassle of tying and untying shoes is one that I try to avoid at all costs, so slip-on shoes are ideal for me. The shoes are not slip-on, but instead have laces. Fortunately, we can modify our footwear so that it is easier to slip on.

Use different lacing techniques, such as the army lacing, straight bar lacing, or double cross lacing, to create a pair of slip-on shoes. Shoelaces can also be made into slip-ons with the help of elastic laces or lace anchors.

Here are five quick and simple methods to get your shoes on without fumbling with laces:

1. Army lace fashion
2. Lacing with straight bars
3. Lacing pattern with a cross over
4. Make your laces stretchy
5. Anchor with lace.

Although the act of lacing your shoes doesn't take long, it can be annoying if you're in a rush. Modifying your footwear to be slip-on style can alleviate some of the hassle and difficulty in your daily routine. So, show me what you've got

Tutorial on removing the laces from shoes to make them slip-on

Slip-on shoes may take a few minutes to change into, but will save you a lot of time in the long run. If you're looking for a hassle-free way to put on your shoes, slip-ons are the way to go.

Make sure your shoes fit comfortably after lacing them up, with just enough give to allow you to get them on and just enough tightness to keep them there. Cushioned insoles inside the shoe are a common factor in finding a good match.

You should know that different lacing techniques can make your shoelaces either longer or shorter. If your laces are too short to go through the eyelets, try tying a knot at the end of each lace. Depending on how long they are, a traditional knot could be the solution.

Here are some approaches that should prove useful:

First, there's the Army Lace.

My top pick is the army lacing method. If you use the army lacing method, your laces will cross on the inside of the shoe, making it simple to slip your shoes on and off. Because of their less flexible nature, I suggest lacing thick leather boots in the army style.

So, let's check out the procedure:

1. Start by threading the shoelaces through the toe area's lowest eyelets. The aglets, the hard metal or plastic ends of the shoelaces, must now be fed through the holes and pressed against the shoe tongue.
2. Take the left shoelace and thread the aglet into the eyelet above the first on the left shoe.
3. Steps 1 through 3 should be repeated for the right shoelace. Get the right aglet and thread it through the right eyelet that is directly above the first eyelet on the right side of the shoe.
4. Take hold of the left and right ends of the shoelace, and then cross them diagonally over the shoe. Using the third eyelet on the right side of the shoe, thread the left end of the lace through it, and the right end through the left eyelet. The shoelace's end pieces, known as aglets, are now exposed.
5. An elementary design is made up of lines on the right and left sides of the shoe and a diagonal cross in the middle.
6. Do the same on both ends of the shoelace in step 2. Put the aglets through the next set of eyelets on both sides and push them down.
7. Go back to Step 4 Pull the aglets on the left and right shoelaces and cross them over the tongue. When you reach the next set of eyelets, insert the two aglets.  
8. The process described above must be repeated until the shoelaces reach the very top.

2) Lacing with a Straight Bar

Straight bar lacing is another option for creating slip-on shoes. A more polished and tidier option for lacing dress shoes, this method allows for quick donning and removal. As an added bonus, you can skip the hassle of constantly tying and untying your laces with straight bar lacing.  

Okay, here's the deal:

1. In the first place, take your footwear and keep them with the front of the shoe facing you.
2. Put your lace through the two eyelets at the front of your shoe, above the toe. Second, insert the right aglet into the right eyelet and the left aglet into the left eyelet hole. This will result in the first, straight bar on your shoe.
3. To tie your shoes, begin at the left aglet and work your way up through the second eyelet on the left side of your shoes.
4. Now, cross the lace over to the right side of the shoe and thread the aglet down through the second eyelet on the right. A second parallel bar will be produced.
5. The two ends of the lace are now aligned. Pull the lace from the bottom of the shoe up through the third eyelet on the right side. The right shoelace should start at the second eyelet and go up through the shoe's fourth aglet. That's how it's done (in the clip)
6. Then, insert each aglet from above by crossing the lace ends from right to left. One lace from the right will pass through the middle and into the left's third eyelet. In the same vein, the fourth eyelet A third and fourth vertical bar will result from this.
7. The two ends of the lace are now aligned. It's best to keep going until both laces are even at the top.
8. Insert the aglet downward through the second-from-top eyelet, then cross over to the other eyelet. Then, on the same side, pull the aglet of the same lace through the top eyelet.
9. At last, tie a loose knot if you'd like, and your slip-on shoes are done!

Watch this video for detailed guidance.

Expect to spend three to five minutes of your time untying and retying your shoes as you master this lace style. Increased length for greater density of eyelets. It might take a little longer if the laces are too tight or too loose.

In case your laces were laced in the conventional manner, you should know that they will be longer. For a more polished appearance, you might need to replace the laces with something shorter. Alternately, you can tuck them in or tie a decorative knot.

Triple-X Styling

The double cross lacing method is another fun and simple way to make shoes easier to slip on and off. As a result of the versatility afforded by the option to use two sets of contrasting laces, this lacing method has quickly become a fashion favorite. Excellent for both dress shoes and casual sneakers.

Wearablyweird.com suggests that shoes with six or more eyelets are best suited for double lacing.

To achieve the double-cross lacing look, take two separate laces, tie them together, and then thread them through the shoe's eyelets.

Here are the measures that must be taken:

1. Start by joining the two shoelaces together. It's important to tie the knot tightly and close to the ends of the laces.
2. Insert one lace through the right shoe's lowest eyelet from the inside. The knot should be tucked inside the shoe, below the eyelet.
3. Now, thread the top end of your right shoelace through the bottom eyelet on your left shoe. Make sure the aglet of the shoelace enters the shoe from above. Between the bottom two eyelets, a straight bar will be formed.
4. Then, make an X with the shoelaces by crossing them over each other at the bottom. You can choose to secure your shoelaces from above or below.
5. The laces must be twisted around each other now.  
6. Next, thread the end of each lace through the shoe's second bottom eyelet. When threading, always start on the outside and work your way in. Above the tongue of the shoe, you'll notice a double lace loop.
7. You will need to keep doing this until you have reached the end of the shoe, at which point you will have to stop. Then, insert from the third eyelet on the opposite side by forming an X with the laces.
8. Just keep going until you've laced up the entire shoe and the tongue.
9. The curtain call has arrived. When you use two shoelaces, you'll see that the length of the laces is doubled, giving you more leeway when tying a knot.
10. If you're wearing slip-on shoes, you can simply conceal the shoelaces inside the shoe. If you want to look more put together, tie a bow and tuck it behind your shoe tongue.

Please watch this video for a comprehensive walkthrough.

Don't tie your shoes with regular laces; use elastic ones instead.

Shoes can be made slippy in a number of ways, one of which is by using elastic shoelaces. If you want to save time getting dressed in the morning, consider switching to shoes with elastic laces that only require you to tie the laces once. Elastic shoelaces are suitable for both children and adults.

No-tie or elastic shoelaces eliminate the need to constantly tie and untie your footwear. There are 10 distinct sizes of elastic shoelaces, and the corresponding sizes are printed directly on the laces themselves.

Rather than a traditional tongue, the strap in the middle of these laces is replaced by a thin nub that serves to secure the laces in place.

This is how you put on elastic shoelaces:

1. Before measuring elastic shoelaces, slip one foot into the shoe while the laces are tied normally. Insert the elastic shoelace with the arrowheads over the eyelets, beginning at one end and working your way to the other.
2. The elastic shoelace should not be stretched. The elastic shoelaces should be put in place after the correct size has been determined for each set of eyelets.
3. The two eyelets closest to your foot should be your starting point.
4. First, thread the shoelace's right-side nub through the shoe's right eyelet. Place the nub so that it faces the inside of your shoe. To force the arrowhead through the eyelet, grab the nub on the opposite side of the eyelet and squeeze.
5. The left nub goes in after the arrowhead has been inserted into the right eyelet. Then, repeat with the left nub and its corresponding eyelet.
6. To complete your slip-on shoes, repeat the preceding steps for each set of eyelets.

This video will show you where to buy elastic shoelaces and how to put them in the right shoes.

Utilize Anchors Made of Lace 5.

It's easy to mistake lace anchors for insignificant bits of plastic. Lace anchors are useful because they keep the laces from coming undone and make the shoes easier to put on. Furthermore, if your shoes have lace anchors, you won't have to tie the laces every time you put them on.

To top it all off, lace anchors are very cheap and simple to use. Then, let's take a look at the proper way to employ lace anchors.

1. For securing shoelaces, you can use a tiny plastic piece with two or three holes called a lace anchor. Hold the lace anchor in place with one hand while threading the lace through the top hole.
2. The top eyelet is where you'll want to pull the lace anchor down. Avoid creasing by keeping the shoelaces straight.
3. Step 2: Begin at the bottom of the lace anchor and thread the aglet through the hole.
4. You'll find that the lace anchor provides enough friction to keep your laces from slipping.
5. Gently slide the lace anchor under the eyelet by pulling it close to the eyelet. The lace anchor functions similarly to a bow by preventing the laces from sliding around inside the shoe.
6. It is necessary to install the lace anchor on the other side, so repeat the steps.  
7. If you want your shoes to be easy to put on and take off, install the lace anchor while your foot is inside the shoe.
8. After putting in your lace anchors, you can tuck the extra laces under the tongue of your shoe or tie a bow.

There are a variety of ways to tie off a lacing style. You can wear them loose and let the laces peek out of the top eyelets, or you can tuck the ends in. Alternatively, you can tie the laces in a conventional knot and leave them loose enough to slip on.

You're welcome to use helpshoe.com.

References

In addition, with straight bar lacing, you don’t have to tie and untie your shoes every time you put them on

a href="https://www.simplifiedbeauty.com/how-to-lace-sneakers/">/a>/span>/a>/a>/span>/a>/a>/span>/a> link to Slip-on